Opel-Vauxhall-CID-Video-Interface-Astra-H-Vectra-C-01-hrkk

Opel Vauxhall CID Video Interface Astra H Vectra C

Opel Vauxhall CID Video Interface Astra H Vectra C
Opel Vauxhall CID Video Interface Astra H Vectra C
Opel Vauxhall CID Video Interface Astra H Vectra C

Opel Vauxhall CID Video Interface Astra H Vectra C
CIDVi-AH/VC – Opel & Vauxhall CID Video Interface. Unit is an interface. For Opel wide16:9 CID (Color Info Display) OEM available in car providing video input auxiliary and allowing you in combination with external video devices e. G Android TV box, MirrorLink box, etc to use CID as a smart display. This adapter is a professional and quality product. That allows you to integrate an external Video source to your cars factory fitted CID Screen. Once connected it gives you the ability to connect an. In car DVD player, iPod Video, Media Player, Android TV box, MirrorLink box, CarPC, DVB-T TV Tuner, Rear View Camera, Car Navigation GPS box, etc to keep your passengers entertained. This kit is not including the CID display. You should have the CID running in your car. Compatible to CID available for Vectra C / Signum / Astra H / Zafira B / Corsa C / Corsa D/ Antara / Meriva A / Vivaro connected to the following entertainment head units: CD30, CD30 MP3, CD50 Phono, CDC40 Opera, CD70 Navi, DVD90 Navi and DVD100 Navi. Watch any Video source on your original Factory fitted CID Screen. The interface accepts CVBS/FBAS (composite) analog input, up to three CVBS inputs. NTSC and PAL TV system compatibility for AstraH/ZafiraB/CorsaD/Antara. NTSC (M, 4.34) and PAL (B, D, G, H, I, M, N, N combination), PAL (60) with automatic format detection. Only NTSC system compatibility for VectraC/Signum/MerivaA/CorsaC/Vivaro. Wide 16:9 image format. Digital Video processor providing high quality picture. Image control: three preset modes and one user defined mode with independent programmable. Hue, brightness, saturation, contrast, sharpness for either composite and S-Video signals. Automatic detection of video input signals. Blue screen for video inputs without signals. Automatically switch and display the view from rear view camera when the car is placed in the reverse. Mute radio for listening the parking sensors. Automatically switch and display the view from front view camera for 20s when the gear was changed from reverse to forwarding. Configuration for a reverse camera which does not render “the image in the mirror”. Low Power consumption during video processing. Down the consumption of the battery while the CID-controller displays the image or when the CID is turned off. Automatic scanning and storage of video input with video device attached. Factory reset: restore image parameter to factory default. Multi-functions touch sensor for selecting and configuring of video sources. Can be hidden in dash under a plastic panel. Control port (USB) for controlling video interface. This port provides the possibility to control the CID LCD-TFT and video interface from Front End software running on your In Car PC. The user-defined mode parameters can be configured and stored using this port as well. 4 wires resistive touch screen with USB connection to your in CarPC or car GPS box -optional. Video Interface Kit Part List. Video Interface board – new h/w revision. Video cable for two composite (RCA female) video inputs. Video cable for one composite (RCA female) video input. Control cable touch sensor signal, rear view camera signal and Telmute signal. USB cable (A plug to Mini B plug) connector for CarPC control and user-defined mode. 30 pole flexible flat cable/ribbon cable for inside connection. The Installation is relatively simple and does not require modification of the electrical equipment of the car. The video interface does not require any soldering and separate power. You have only to open the CID and connect the interface inside using the ribbon cable available in the KIT. The installation manual details very well all these steps with pictures and explanations. The video interface board is related only to 16:9 wide CID model available in Vectra C, Signum, Astra H, Zafira B, Antara, Corsa C & D, Meriva A / Vivaro cars. It’s not mandatory to have CID working with Opel CD/DVD OEM head units listed above. You may have any afer market CD/DVD. All the standard CID and head unit functions are available. PLEASE SPECIFY YOUR OPEl/VAUXHALL CAR MODEL FOR VIDEO INTERFACE KIT COMPATIBILITY. The item “Opel Vauxhall CID Video Interface Astra H Vectra C” is in sale since Tuesday, March 8, 2016. This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Car Electronics Accessories\Adapters”. The seller is “sgrigor1″ and is located in Bucharest. This item can be shipped worldwide.
  • Model: CIDVi-VC/AH
  • Country/Region of Manufacture: Romania
  • Opel: CID adapter
  • Type: Auxiliary Input Adapter
  • Features: AUX Port
  • MPN: Does Not Apply
  • Brand: Energys

Opel Vauxhall CID Video Interface Astra H Vectra C